Skip to content

Section 11 · PDF pages 818–821

Resolution and principalization in the geometric input

The notation transcription is provisional. Check it against the printed mathematics when citing or reusing a formula.

11 Resolution and principalization in the geometric input

The covolume argument uses two separate characteristic-zero statements. Their precise scheme-theoretic forms matter: principalization must respect an existing boundary, and resolution must make the entire inverse image of the nonsmooth locus a simple normal crossings divisor. We verify both forms here against the published resolution theorem.

Definition 11.1 (The boundary and blowup conventions). A reduced divisor E on a smooth k-scheme has simple normal crossings if, at every point x, its ideal on some affine neighbourhood is generated by a product of distinct members of a regular system of parameters of 𝒪_{X,x}. Outside E the product is empty and is 1. A smooth centre Z has normal crossings with E if, in such a neighbourhood, the ideal of Z is generated by a subset of the same parameters. After blowing up Z, the new boundary is the reduced inverse image of

Selectable PDF notation • transcription unchecked
E ∪Z.

Source: ReciprocityTheory/AnalyticForms/RegularLocalRings/FinalTheorems.lean:6--21,93--97; Development/AutomorphicSpectrum/PublishedTheorems/Geometry2/NotSubsetOfDenseCompl.lean:14--30.

Here a regular system of parameters means exactly a set of generators of the maximal ideal whose car-dinality is the Krull dimension. This is the source’s Rsp. Its Snc includes regularity of the ambient stalk at

every point. Thus the convention is a Zariski local simple normal crossings condition, with squarefree local equation; a merely normal crossings condition after an unspecified field extension would not suffice. All blowups below are ordinary scheme blowups. Their inverse-image ideal is locally generated by a nonze-rodivisor, and they are terminal among morphisms with that property, by the Stacks Project, Tags 02OS and 0806 [50]. These are exactly the two clauses of the source’s FinalTheorems.Blowup; in particular the universal property ranges over every scheme over X.

Background fact 11.2 (The published characteristic-zero theorems). For a reduced separated finite-type scheme over a characteristic-zero field, there is a finite sequence of blowups with smooth centres ending in a smooth scheme, isomorphic over the original smooth locus. For a marked ideal (M, N, E, ℐ, d), where M, N are smooth, E is an ordered simple normal crossings boundary transverse to N, ℐ is coherent and d > 0, there is a finite sequence of admissible smooth-centre blowups making its cosupport empty. Admissibility means that the centre lies where the order of the current ideal is at least d and has normal crossings with the current boundary; the controlled transform divides the pulled-back ideal by the dth power of the exceptional ideal.

These are Bierstone–Milman, Theorem 1.1, p. 611, and Theorem 1.3, p. 614, with Definitions 2.1–2.2, pp. 618–619 [49]. We use their scheme formulation over arbitrary characteristic-zero fields. The boundary in Definition 2.1 is explicitly simple normal crossings, with smooth components. We do not require any further functoriality assertion.

Proposition 11.3 (Principalization with the source’s initial boundary). Let k be a characteristic-zero field, and let X be a separated quasi-compact smooth k-scheme of pure relative dimension d. Let ℐ be a quasi-coherent ideal and let E be a reduced closed subset satisfying the simple normal crossings condition at its points. Assume that no irreducible component of X is contained in V (ℐ). Then there exist a smooth k-scheme X^{′} and a finite sequence s : X^{′}→X of smooth-centre blowups, all with normal crossings with their current boundaries, such that

ℐ𝒪_{X}′ is an effective Cartier ideal, V (ℐ𝒪_{X}′)_{red} has simple normal crossings.

The sequence is an isomorphism over X \ V (ℐ). With the successive boundaries defined by Definition 11.1, it is precisely a SncBlowup.IsSncBlowupSeq.

Source: Development/AutomorphicSpectrum/PublishedTheorems/Geometry2/NotSubsetOfDenseCompl.lean:57--66 (\lean {PrincipalisationCharZero}).

Proof. Smoothness is locally of finite presentation. Quasi-compactness therefore makes X finite type over k; hence it is noetherian. Its quasi-coherent ideal is coherent. Since k has characteristic zero, it is perfect, so regular finite-type k-schemes are smooth over k. The source’s local boundary equations imply that every component of E is smooth and that any collection meeting at a point is given there by distinct parameters. There are finitely many components. Order them arbitrarily, thereby obtaining the boundary required in Fact 11.2. At points outside E, its ideal is the unit ideal; after shrinking to an affine open disjoint from E, the empty product verifies the same convention there.

Apply the marked-ideal theorem to (M, N, E, ℐ, d) = (X, X, E, ℐ, 1). Transversality to N = X is automatic. The hypothesis excluding whole components makes the ideal nonzero at each generic point. Each centre lies in the cosupport of the current controlled transform and has the stated parameter description. The ambient schemes and centres are smooth over k. Induction on the blowups therefore gives exactly the source’s inductively defined sequence: its boundary step is reduced inverse image of the old boundary and centre, which is the union of the strict old components and the new exceptional component. Repetitions of a component in this union have no effect on its reduced closed subset.

For completeness, the conclusion about the total ideal follows from the controlled-transform conclusion. Write ℐ_{j} for the controlled transform on X_{j}, and write H_{j} for the exceptional Cartier ideal at the jth blowup π_{j}. By its transformation rule,

Selectable PDF notation • transcription unchecked
ℐ_{j−1}𝒪_{Xj} = H_{j}ℐ_{j}.

Repeated substitution expresses the total pulled-back original ideal as ℐ_{t} times a product of pulled-back exceptional Cartier ideals. The empty final cosupport for marking 1 means ℐ_{t} = 𝒪_{Xt}: at each local stalk an ideal of order zero contains a unit. The remaining factors are invertible effective Cartier ideals. Their divisors are supported on the final simple normal crossings boundary. In regular parameters their product is therefore a unit times z_{1}^{a1}· · · z_{r}^{ar}, with a_{i} ≥0. Its generator is a nonzerodivisor, because the regular local ring is a domain. Shrinking the affine neighbourhood preserves both that property and the equality of the ideal with this principal ideal. This verifies EffCartier in the source’s affine form. The radical ideal is generated by the squarefree product of those z_{i} for which a_{i} > 0; hence it verifies Snc.

Finally, outside the support of the original ideal the initial controlled ideal is the unit ideal. It remains the unit ideal throughout, so none of the admissible centres meets that open set. Every blowup restricts there to the identity up to its canonical isomorphism. Their composite is consequently an isomorphism over

Selectable PDF notation • transcription unchecked
X \ V (ℐ).

Proposition 11.4 (Resolution with the full nonsmooth inverse image). For a reduced separated finite-type k-scheme X over any characteristic-zero field, there is a finite sequence of blowups s : X^{′}→X such that X^{′} is smooth, s is an isomorphism over the smooth locus U of X/k, and the reduced inverse image of X \U has simple normal crossings. This is the full statement ResolutionCharZero used in the covolume package.

Source: Development/AutomorphicSpectrum/PublishedTheorems/Geometry2/ConclusionOfSmooth.lean:17--32,53--59.

Proof. Apply the first part of Fact 11.2 to obtain a smooth Y and a blowup sequence r : Y →X that is an isomorphism over U. Over a perfect field the smooth and regular loci agree for a finite-type reduced scheme. In particular U contains each generic point of X. Each centre in the stated resolution lies over the original singular locus; equivalently its sequence is the identity over U. The resulting Y has no component supported over X \U: blowing up a generically nonzero ideal is birational on each component, as is seen by restricting its Rees algebra to that generic point. Thus r^{−1}U is dense in every component of Y .

Let 𝒥 be the ideal of the reduced closed subset X \ U, and set ℐ = 𝒥 𝒪_{Y} . It is coherent and is the unit ideal on r^{−1}U, so it vanishes on no entire component of Y . Principalize it by Proposition 11.3, with empty initial boundary, obtaining t : Y^{′}→Y . If the smooth components have different dimensions, apply the proposition to each pure-dimensional open and closed part. There are finitely many such parts; the resulting blowups on their disjoint union give one finite sequence (insert identity steps on the other parts). This removes the pure-dimension restriction in that application.

The composite s = r ∘t is a finite blowup sequence: concatenate the two lists of centres. The source’s Resolution.IsBlowupSeq imposes no smooth-centre restriction, so in particular accepts this sequence. It is an isomorphism over U, since both r and t are isomorphisms there. Its reduced inverse image of X \ U is exactly the reduced support of ℐ𝒪_{Y} ′, which has simple normal crossings by principalization. The ambient Y^{′} is smooth, so all of its stalks are regular. This proves every conjunct of the source statement, including the condition on the whole inverse image, rather than only on the exceptional divisors listed by a chosen resolution algorithm.

Both results are used in the fifteen-input geometric package before the point-separation and Arakelov es-timates produce the covolume bounds. They supply slots 1 and 2 of that package. They do not by themselves prove the remaining Hodge, toroidal, metric or quantitative inputs.

Corollary 11.5 (The projective principalization used by the Hodge package). The source’s separate state-ment GlobalTheory.Published.Principalisation holds: if Y is integral, smooth of relative dimension d and projective over a characteristic-zero field, and 0 ̸= ℐ is an ideal, its principalization may be chosen integral, smooth of that same dimension and projective over the field. Its smooth-centre blowup sequence is supported over V (ℐ), is an isomorphism on the complement, and makes the pulled-back ideal effective Cartier with simple normal crossings reduced support.

Source: Development/AbelianVarietyTheory/PublishedTheorems/Divisors2/GeometricallyConnectedOfIsIsoRestrict.lean:13--19,118--125.

Proof. Projectivity gives quasi-compactness and separatedness. The nonzero ideal on the integral scheme vanishes on no entire component, so Proposition 11.3 applies, with empty initial boundary. Its centres are smooth and contained over V (ℐ): on the inverse image of its complement the total ideal is a unit, and the controlled-transform relation in that proof makes the controlled ideal a unit as well. No admissible centre can meet that open set. Thus its sequence satisfies exactly the source’s IsSmoothBlowupSeq f (I.support).

Each blowup of an integral scheme in a generically nonzero coherent ideal is integral. On an integral affine chart its nonempty blowup charts are rings A[ℐ/f] inside Frac A, hence domains; their common dense open is the unchanged complement of the ideal, so their union is reduced and irreducible. That open is nonempty because the original ideal is nonzero. These observations also apply at each subsequent step. Each blowup is projective, being the relative Proj of its finitely generated Rees algebra. Its composite with the original projective morphism is therefore projective.

The resulting scheme is smooth by the proposition and birational to Y . Its function field has transcen-dence degree d over k. On an integral smooth scheme the relative dimension is locally constant, and its constant value equals this transcendence degree; therefore the new scheme is smooth of relative dimension d. The isomorphism on the complement, effective-Cartier property and simple normal crossings conclusion were already proved in Proposition 11.3. All extra conjuncts in this Hodge-package formulation are now verified.